Cement Tile Restoration2018-10-13T01:57:21+00:00

STEP 1. CHANGE BROKEN TILES

Replace all cracked and broken Cement tiles from the roof.

STEP 2. PRESSURE CLEANING

Dirt, grime and fungi are removed from the Cement tiles on the roof using 3500 psi water pressure, and all mess is cleaned up. Council regulations are met for this process.

STEP 3(a). REPOINT OF ROOF

Flexible pointing is used to point ridge caps allowing for 17mm of movement before cracking. Rebedding is performed when necessary on Cement tiled roofs.

STEP 3(b). WEEP HOLES

Weep holes are to be in stored under Australian Standards

STEP 4. PRIMER COAT

Roofshield has developed 3 different forms of Sealer/Primer, it goes on milky white and dries clear. A Roofshield roof estimator will be able to advise you of which primer/sealer is required for your property’s Cement tiled roof.

STEP 5. HAND PAINTING

All required hand brushing components of your roof will be done by hand

STEP 6. FIRST COLOUR COAT

The first colour coat of Roofshield membrane is then applied to the Cement tiled roof. The coating is applied by using airless spray gun therefore guaranteeing no overspray.

STEP 7. FINAL COAT

The Final Coat of coloured protective membrane is applied to the Cement tiled roof.This ensures an even coverage over the roof resulting in the best protection and appearance.

STEP 1. CHANGE BROKEN TILES

Replace all cracked and broken Cement tiles from the roof.

STEP 2. PRESSURE CLEANING

Dirt, grime and fungi are removed from the Cement tiles on the roof using 3500 psi water pressure, and all mess is cleaned up. Council regulations are met for this process.

STEP 3(a). REPOINT OF ROOF

Flexible pointing is used to point ridge caps allowing for 17mm of movement before cracking. Rebedding is performed when necessary on Cement tiled roofs.

STEP 3(b). WEEP HOLES

Weep holes are to be in stored under Australian Standards

STEP 4. PRIMER COAT

Roofshield has developed 3 different forms of Sealer/Primer, it goes on milky white and dries clear. A Roofshield roof estimator will be able to advise you of which primer/sealer is required for your property’s Cement tiled roof.

STEP 5. HAND PAINTING

All required hand brushing components of your roof will be done by hand

STEP 6. FIRST COLOUR COAT

The first colour coat of Roofshield membrane is then applied to the Cement tiled roof. The coating is applied by using airless spray gun therefore guaranteeing no overspray.

STEP 7. FINAL COAT

The Final Coat of coloured protective membrane is applied to the Cement tiled roof.This ensures an even coverage over the roof resulting in the best protection and appearance.